CITCO turnable diamond dressing tools

The CITCO turnable dressing tool is a unique and versatile diamond dresser used on a variety of machines applications such as; surface grinding, O.D./I.D. grinding, and centerless grinding. The most common applications are straight face dressing, external radii, and large internal radii of an abrasive wheel. The CITCO turnable dressing tool is also designed to be easily and economically retrofitted to a variety new or existing grinding machines.
The CITCO turnable dressing tool utilizes a hardened steel shank which remains rigid during indexing. This eliminates vibration to ensure more precise wheel dressing and improved workpiece quality.
COST SAVING OPPORTUNITIES
— Lower cost-per-piece, when compared to straight shanked tools for the same application
— Easy rotation thanks to the turnable head, resulting in up to 7x straight shank life when indexed properly
— Improved workpiece quality due to frequent turning of the dressing tool, keeping the diamond(s) sharp
— Reduction in dressing tool inventory, since a variety of operations are performed with one size/ style of tool
— Total cost-per-part is reduction is possible, with less downtime for dressing and tool changes
— Resetting affords maximum economy in the use of diamonds
AVAILABLE SERVICES
— Relap
— Reset
— Recycle used or scrap diamonds
0 = .10 Ct. | 4 = .50 Ct. |
00 = .15 Ct. | 5 = .75 Ct. |
1 = .20 Ct. | 6 = 1.00 Ct. |
2 = .25 Ct. | 7 = 1.50 Ct. |
3 = .33 Ct. | 8 = 2.00 Ct. |
-
S = Select, 4-6 points
-
A = 3-4 points
-
B = 2-3 points
-
C = 1-2 points
-
TRP = 1 point
1 = To print | 5 = 5/16" |
2 = 1/8"
| 6 = 3/8" |
3 = 3/16"
| 7 = 7/16" |
4 = 1/4"
| 8 = 1/2" |
-
R = 60°
-
U = 75°
-
W = 90°
-
Y = 110°
-
Z = 120°
⇒ For recruitment-related matters (application, etc.), please do not use this form. Make your requests on this page.
In order to address your request, we need to collect the information listed in the form below
Information on data processing
As a data processor, FIVES implements personal data processing when managing your contact request. The data collected are required for this processing and are retained, unless you object, for a period of 6 months from the last contact between you and FIVES. If the information is incomplete, FIVES will not be able to respond to your contact.
The data collected are exclusively for the use of FIVES departments.
Pursuant to current legislation, you have the right to request access to data concerning you, their correction, deletion and portability, as well as a right of limitation over processing of your data.
These rights can be exercised by email to DPO@fivesgroup.com or by post to the Data Protection Officer at the following address: FIVES, 3 Rue Drouot, 75009 Paris, accompanied by a copy of an identity document.
In case of a dispute involving processing of your personal data, you have the right to make a complaint to the French Data Protection Agency (CNIL).
To find out more about our personal data protection policy click here